To defog the mist formed on the outside, follow these steps
Switch the A/C ON and set temperature to ‘Max hot air’
DEFOG THE WINDSHIELD
Keep recirculation
mode turned on.
Set blower speed to
maximum.
Switch defrost mode on
to allow air to flow onto
the windshield.
Use the front wiper if
necessary.
15
To defog the mist formed on the inside (due to the heater), follow these steps:
Switch the A/C ON and set temperature to ‘cold air’
Keep recirculation mode
turned OFF.
Set blower speed to
maximum.
Switch defrost mode on
to allow air to flow onto
the windshield.
COMFORT & CONVENIENCE
The modes, fan speeds, air circulation and air conditioning will be controlled automatically by
temperature setting you select.
To turn off the Automatic climate control mode, just click on modes, fan speed or air
circulation mode and it will automatically go to manual mode.
To Next Page
Loading...
