15 - AUTOMATIC VEHICLE HOLD (AVH)
Automatic Vehicle Hold
22
Start and shutdown of AVH can be memorized. If AVH is in the ON/OFF state when the engine is shut off the last
time, AVH remains in the corresponding state when the engine is switched on the next time.
Vehicles provided with Electronic Parking Brake (EPB) has AVH function
AVH function is activated when driver presses brake pedal and the vehicle stops, or driver presses the
brake pedal when vehicle is motionless and engine is idle.
Once brake pedal is released, hydraulic pressure in braking system will be maintained to hold vehicle in
position. There is no need to draw back EPB to park.
Within 5 minutes, if driver presses accelerator and releases the clutch, the hydraulic pressure in the
braking system will be released to move the vehicle
After 5 minutes, EPB will be automatically activated and park the vehicle
SAFETY
To Next Page
Loading...
