Your vehicle is equipped with a state-of-the-art engine and exhaust system to meet emission standards. It is designed
to trap and burn Particulate Matter (PM) pollutants, with no driver input or interaction.
The main function of DPF is to collect particles in vehicle exhaust, and to remove particles collected in DPF through
active and triggered regeneration.
The indicator will illuminate when DPF is blocked partially/completely. It does not affect the operation of the vehicle,
but if it is due to blockage of DPF, it may affect engine power performance.
20 - DIESEL PARTICULATE FILTER
(ONLY FOR DIESEL VEHICLE)
If the indicator is still on after running at constant, please visit the nearest MG authorized service centre for
rectification.
Diesel Particulate Filter Indicator
Follow below steps for regeneration cycle:
29
If DPF warning light is ON, please drive vehicle at a constant speed of 70-80 kmph for a while until
regeneration cycle completes and DPF warning light goes off.
On an average this process may last for 20-25 minutes.
WARNINGS & PRECAUTIONS
To Next Page
Loading...
