3.5 Folding
3.6 Positioning the Seat
IMPORTANT: Depress the seat with your hand before sitting.
Do not use the seat on uneven surfaces. MGI does not warranty
any seat support brackets that are damaged or bent.
3.7 Positioning the Sand Bucket Loop
The sand bucket loop can be added to other end of the seat
bracket.
Your buggy will look like this once the seat and sand bucket
loop are added. For personal choice, these accessories can be
placed on either side of the buggy.
MGI Hunter™ Quad User Manual 0908
Step 6: Bring the top bag support brackets together, then lock
together using the button.
Step 1: Open the fold lever 2
to release the handle.
Step 2: Press the button shown while
applying pressure down to close.
Step 3: Lower buggy down flat and close fold lever 2
to lock handle.
Step 1: Using the bracket provided, feed it through as shown
in the picture.
Step 2: Secure the bracket by adding the screw in the position
shown.
Step 3: You can now insert the seat into the bracket.
Add the Sand Bucket
Loop here.
To Next Page
Loading...
