MGI ZIP X1 - What is Included; Assembling Your MGI ZIP Caddy; Attaching the Rear Wheels; Rear Wheel Positions

It is most important you register your MGI Caddy online
immediately as registration:
• Records your caddy for warranty purposes
• Speeds up any servicing required on your caddy
• Assist us to contact you with any updates to your caddy
To register your caddy, visit www.mgigolf.com
You will need to record your MGI serial number. This is found on
the caddy battery base or in the top box compartment.
Please keep this user manual on file for your own reference
and a copy of your serial number;
My MGI Caddy Serial Number is
[example AZX1V1173401234]
Purchased Date
/ /
You may be required to show proof of purchase so we
recommend you keep your receipt with this manual.
2.0 What’s Included
• MGI ZIP Caddy
• 24v Lithium Battery
• Battery Charger
• GPS Holder
• MGI Pouch with:
– User Manual
– Accessory Guide
3.0 Assembling Your Caddy
3.1 Attaching the Rear Wheels
Step 1. Each wheel is labelled with L or R for left or right. This is very
important as the wheels must be placed on the correct side of the
caddy. Left or right sides are determined when standing behind
the caddy as pictured above.
Step 2. On the wheel, press the grey release button on the wheel
hub. Place the wheel onto the axle. You will notice you need to
match up the inner female groove on the axle and the male
of the wheel. When placed in position simply release the button.
You will notice you hear a “click” when the wheel is properly
secured. To check that the wheel is properly in position pull
on the wheel. If it is properly in position it will not slide off.
Repeat for the other wheel.
3.2 Rear Wheels Positions
The MGI ZIP caddy is designed to allow the rear wheels to be in
MGI ZIP X1 User Manual 0504
Lefthand
side
Righthand
side