MGL Avionics EFIS G2 User Manual

MGL Avionics EFIS G2 and iEFIS
Guide to using the MGL RDAC CAN interface with the
UL Power engines

MGL Avionics EFIS G2 Specifications

General

Brand	MGL Avionics
Model	EFIS G2
Category	GPS
Language	English

Summary

MGL Avionics EFIS G2 and iEFIS

Data connections

Details on connecting the RDAC CAN interface, including CAN bus and RS232.

UP Power Engine Data

Configuration parameters and data points for UL Power engines via RDAC CAN.

Fuel flow rate

RDAC CAN Functions and Inputs

Fuel level sender inputs

DC current monitoring input

Connector pins

Pin assignments for DB9 and DB25 connectors.

Operation and Troubleshooting

LED states

Grounding the RDAC CAN

Guidelines for safe grounding to prevent damage and interference.

Power Supply and Configuration

Power supply requirements

RDAC CAN dipswitch assignment

Configuration of RDAC CAN unit assignment using DIP switches.

“Both ECUs” operation

EFIS Setup and Diagnostics

Status LED

Error codes

G2 EFIS setup

Configuration steps for G2 EFIS to use CAN bus for RDAC data.

UL Power ECU diagnostics

Overview of status messages and diagnostic information from the ECU.

CAN Bus Primer and Checks

Basic wiring checks

Methods for performing basic voltage checks on CAN connections.