Why does my Mhouse Gate Opener start then reverse?
If your Mhouse Gate Opener's manoeuvre starts but immediately reverses, it could be due to insufficient force being applied to move the leaves. Check for any obstructions that may be hindering the gate's movement. If there are no obstacles, you may need to increase the force setting as described.
What to do if my Mhouse WG2 doesn't start and the flashing light flashes?
If the Mhouse Gate Opener manoeuvre doesn't start and the flashing light flashes a few times, ensure that the STOP input is not active. Check if the "STOP" LED [C] is illuminated. If it isn't, inspect the devices connected to the STOP input. Also, the photocell test may be failing at the start of each manoeuvre. Check the photocells.
General| Brand | Mhouse |
|---|---|
| Model | WG2 |
| Category | Gate Opener |
| Language | English |
To Next Page
