Mi 3C User Manual

Mi Wi-Fi Router 3C
Setup Guide Using Mi WiFi App
When setting up as a primary router:
1. Power on the router, connect the Ethernet (RJ45) cable to the Internet port seen behind
the router and switch it on.
Download the Mi WiFi app from Google Playstore or Apple App Store. Alternatively, you
can also scan the QR code available below or on the product box or inside the product
manual.
2. Open the Mi WiFi app. Sign in to your Mi account. Once signed in, the app allows you to
search for the Mi WiFi router.
Once detected, ‘Set up now’ button will be active to proceed further.

Mi 3C Specifications

General

Type	Wireless Router
Frequency	2.4GHz
Wireless Speed	300Mbps
RAM	64MB
ROM	16MB
Wireless Standards	IEEE 802.11b/g/n
Ports	2 x LAN, 1 x WAN
Processor	MT7628N
Operating System	MiWiFi ROM
Model	Mi Router 3C

Summary

Setting Up as Primary Router

Router Power-On and App Download

Power on the router, connect Ethernet cable, and download the Mi WiFi app.

Connecting Router via Mi WiFi App

Sign in to your Mi account and initiate router detection to begin setup.

Selecting Router Location

Tap 'Set up now' and choose the router's physical location from the app options.

Network Type Detection

The Mi WiFi app automatically detects your internet network type (e.g., PPPoE, DHCP).

Entering ISP Credentials or Importing Settings

Input PPPoE account/password or import settings from an old router.

Configuring Wi-Fi Network

Set the Wi-Fi network name and password for your router, with an option for admin password.

Setting Up as Secondary Router

Secondary Router Setup Options

Choose between Wireless or Wired Repeater mode for setting up the Mi WiFi Router.

Wireless Repeater Mode Configuration

Select Wi-Fi network and set up the router to extend it wirelessly.

Wired Repeater Mode Configuration

Connect via Ethernet and configure the router for wired network extension.