Mi H300 - Specifications; Troubleshooting

12
Specifications
Title:
Mi Ionic Hair Dryer H300
Model:
CMJ02ZHM
Rated voltage:
220-240 V~
Rated frequency:
50 Hz
Rated power:
1600 W
Product dimensions:
135 × 77 × 215 mm (including air nozzle)
Net weight:
539 g (including air nozzle)
Troubleshooting
The Problem
Possible cause
Solution
When the hairdryer is
switched on, the negative
ion light comes on and the
temperature light flashes
yellow, but the hairdryer
does not work.
The temperature is too high,
and the dryer has entered
the NTC overheat protection
state.
Leave the dryer off for a
while and then switch it on
again.
The hair dryer is not
responding when you turn it
on.
The temperature is too high,
and the dryer has entered
the overheating protection
state provided by the
thermostat.
Leave the dryer on for 5
minutes.
The thermal fuse is blown,
and the dryer is damaged.
Contact after-sales service.
When the hair dryer is
switched on, the negative
ion light comes on, but the
temperature light does not
come on and the dryer does
not work.
The negative ion indicator
plate is damaged.
Contact after-sales service.
Inadequate supply voltage
Use a 220-240 VAC 50 Hz
power supply.