1450
9
Gun Safety Button
Trigger
1
2
H
H
8. Fix the garden hose adapter
with the garden hose turning
clockwise.
9. Attach garden hose adapter
with the pump end onto the
front of the pressure washer.
16. Pull trigger then turn on power
switch located on back of pres-
sure washer.
10. Activate the lock by holding the
gun and push the lock from left
to right.
11. Squeeze trigger to make sure
the trigger does not move.
12. The safety trigger lock should
be locked at all times when pres-
sure washer is not in use.
17. Spray pattern shape and inten-
sity can be changed by twisting
the spray adjuster at the end of
the lance. KEEP HANDS CLEAR
OF THE FRONT OF THE LANCE
TO PREVENT INJURY. NOTE: Tur-
bo nozzle is not adjustable.
NOTE: This pressure washer is
equipped with a micro-switch sen-
sitive to water flow. This Total Stop
System (TSS) senses water flow in
the pump. When the trigger is re-
leased, water stops flowing through
the pump. The TSS then automati-
cally turns the motor off to protect
the pump from overheating.
13. Plug the power cord into a
grounded 120V outlet.
14. THIS MUST BE DONE EACH TIME
THE UNIT IS PLUGGED IN AN
OUTLET.
15. To unlock gun trigger push lock
right to left.
H
mpx1450_en.indd 9 22/02/10 09:29
To Next Page
Loading...
