Michelin Road Flare - User Manual

Need help?

Do you have a question about the Michelin Road Flare and is the answer not in the manual?

Summary

Safety and Warnings

General Safety Precautions

Advises against children playing with the product, avoiding heat sources, and using only for intended purposes.

Pacemaker Interference Warning

Warns about magnetic interference with medical devices and advises keeping a distance.

Product Features and Specifications

Key Features

Lists characteristics like water/dustproof, floating, submersible, bright flashlight, 360° visibility.

Technical Specifications

Details brightness, LED quantity, light patterns, visibility range, battery, material, load capacity, and dimensions.

Operating and Maintaining the Road Flare

Operation Guide

Instructions for turning the unit on/off and changing light modes.

Battery Management

Steps for inserting, changing, and replacing AA batteries for optimal performance.

Maintenance Recommendations

Guidance on battery replacement intervals and cleaning the unit.

The Michelin High Visibility LED Road Flare is a versatile and robust safety device designed for roadside emergencies and other situations requiring high visibility. This user guide provides comprehensive information on its function, usage, and maintenance, ensuring years of reliable service with proper care.

Function Description

The primary function of the Michelin High Visibility LED Road Flare is to enhance safety and visibility in various environments, particularly during roadside emergencies. It serves as a non-flame producing flare, offering a safer alternative to traditional pyrotechnic flares. The device is equipped with 12 LEDs (6 white and 6 red) that can produce multiple light patterns, including a bright flashlight mode and several emergency flashing patterns. Its design ensures 360° visibility up to 1 mile, making it highly effective in alerting others to your presence. The flare is built to withstand challenging conditions, being water- and dustproof with an IP67 rating, and capable of floating and being submerged up to 1 meter for 30 minutes. This durability makes it suitable for use in various weather conditions and environments.

Usage Features

The Michelin High Visibility LED Road Flare is designed for ease of use and versatility.

Operation:
- Turning On: To activate the unit, simply press the power button.
- Changing Modes: To cycle through the different light patterns, gently press the power button until the desired flash pattern is found. This allows users to select the most appropriate pattern for their specific situation.
- Turning Off: To deactivate the unit, press the power button again.
Light Patterns and Run Times: The flare offers six distinct light patterns, each with a specified run time, providing flexibility for different scenarios:
- Flashlight: Provides a steady beam of light for general illumination, with a run time of 10 hours.
- Rotate: A rotating light pattern, ideal for drawing attention, with a run time of 13 hours.
- Triple-Blink: A pattern of three quick blinks, offering a highly noticeable signal, with an impressive run time of 32 hours.
- Alternate: An alternating light pattern, effective for warning, with a run time of 5 hours.
- Single-Blink: A single, distinct blink pattern, providing a long-lasting warning, with the longest run time of 100 hours.
- Solid-On: A continuous, steady light, useful for constant illumination or marking, with a run time of 5 hours.
Mounting and Placement: The flare is equipped with strong magnets and double metal hooks, offering multiple options for secure placement. The magnets allow it to be easily attached to metal surfaces, such as the body of a vehicle, while the hooks provide a means to hang the flare where needed. This versatility ensures that the flare can be positioned optimally for maximum visibility in various roadside or emergency situations.
Battery Insertion/Changing: The device is powered by 3 AA batteries, and the process for inserting or changing them is straightforward:
1. Insert a coin into the slot on the back of the unit and turn it counter-clockwise to loosen and remove the battery cover.
2. Install 3 AA batteries, ensuring they are placed in the proper orientation as shown on the battery holder. For optimal performance, it is recommended to replace all batteries at the same time and avoid mixing old and new batteries or different types (alkaline, heavy duty, and rechargeable).
3. Replace the battery cover and turn it clockwise, using a coin to ensure a tight seal, which is crucial for maintaining the unit's water- and dustproof integrity.
Safety Guidelines: Users are advised to always consult their local highway safety guidelines for appropriate use and placement when using the flare in emergency roadside situations. It is important to remember that this product is not a toy and should not be handled by children. The device should not be stored in direct sunlight or near a heat source. Furthermore, the strong magnets within the product may interfere with pacemakers and other implanted medical devices. Individuals with such devices should keep the product at least 6 inches from their chest.

Maintenance Features

Proper maintenance ensures the longevity and reliable performance of the Michelin High Visibility LED Road Flare.

Battery Management: All batteries discharge over time, even when not in use. To ensure the unit is always ready for use, it is recommended to replace the batteries every 6 months. If the unit will not be used for an extended period, the batteries should be removed to prevent potential leakage and damage to the device.
Cleaning: The outer surface of the flare can be cleaned as needed using a slightly damp cloth with a mild detergent. This helps to keep the unit free from dirt and grime, maintaining its appearance and functionality.

By following these guidelines for function, usage, and maintenance, users can maximize the effectiveness and lifespan of their Michelin High Visibility LED Road Flare, ensuring a reliable safety tool for any situation.