Need help?Do you have a question about the Michelin FAST GRIP and is the answer not in the manual?
General| Brand | Michelin |
|---|---|
| Model | FAST GRIP |
| Category | Automobile Accessories |
| Language | English |
Critical warnings regarding no responsibility for damage, not using lock nuts, removing wheel caps, and trying chains at home.
Practice fitting chains at home for comfort and safety, ensure tyre compatibility, and check tyre condition.
Handle vehicle smoothly, avoid sudden acceleration/braking, use only on snow/ice, and observe highway code when towing.
Follow instructions, wear safety gear, fit in pairs on driving wheels, check chains visually, and inspect used chains.
Check chain position and tension after short distance, store dry, wash chains, keep away from chemicals, and remove before freezing.
Maintain tyre pressure, check chain clearance, keep anti-skid devices active, do not exceed 50 kph, and be careful with hands/hair.
Ensure tensioning handle is OPEN, fit chain to wheel, and separate universal nut from fitting wrench.
Fit universal nut onto wheel nut, align sides, tighten securely with wrench, do not use torque wrench.
Press latch, push wrench onto universal nut until click, position wrench correctly for cable placement.
Lift handle to ADJUST, tighten serrated knob, move handle to LOCKED, loosen if excessive force is needed.
Move vehicle to check position, adjust tension as needed, and adapt chain circumference with staples if necessary.
For subsequent uses, skip to step 9. Verify tension after 50-100 meters. Maximum speed 50 kph.
To Next Page
