Need help?Do you have a question about the Micrel KS8995MA and is the answer not in the manual?
Explains the quickest and easiest way to get started using strap-in configuration by setting board jumpers.
Details the function of each jumper for setting strap-in configurations on the KS8995MA.
Describes how to use the on-board EEPROM for advanced capabilities via a parallel port interface.
Explains accessing KS8995MA features and registers via the SPI interface using a computer.
Details the DOS-based software for programming the evaluation board's EEPROM without an external programmer.
General| Model | KS8995MA |
|---|---|
| Ports | 5 |
| Speed | 10/100 Mbps |
| Power Supply | 3.3V |
| Interface | MII/RMII |
| Features | QoS Support |
To Next Page
