To Next PageTo Next Page
Need help?Do you have a question about the Micrel KSZ8795 Series and is the answer not in the manual?
Overviews the main features of the KSZ8795 evaluation board.
Describes the physical board, ports, and power options.
Details configuring the board using jumpers for quick setup.
Explains the function of various jumpers for system configuration.
Covers accessing the device via SPI interface using a USB converter.
Details the 10/100 Ethernet ports and the Gigabit port.
Explains the status and activity LEDs for Ethernet ports and power.
Introduces the software tools for accessing registers and features.
Step-by-step guide for installing drivers on Windows systems.
Instructions for installing the main evaluation software on your PC.
Details the DOS utility for direct register read/write operations.
Describes the GUI application for configuring switch settings via SPI.
Explains the use of the LinkMD tool for cable diagnostics.
Lists available datasheets and the hardware design package.
Directs users to BOM and schematic files in the design package.
General| Speed | 10/100 Mbps |
|---|---|
| Number of Ports | 5 |
| VLAN Support | Yes |
| Ports | 5 |
| Package Type | QFP |
| Power Supply | 3.3V |
| Type | Ethernet Switch |
| MAC Address Table Size | 2K |
| Quality of Service (QoS) | Yes |
