Advanced EasyStart Troubleshooting
EasyStart is designed for excellent reliability and durability. Every EasyStart is tested on a
compressor before it leaves Micro-Air to ensure it will work when delivered. This document is provided
in the event there is a problem with installation or operation, to help determine if EasyStart is the cause
of the problem.
This document is separated into sections that guide troubleshooting from new installations to
existing systems. Understanding the short cycle timer is important to troubleshooting. Read that section
then jump to the section that applies to your situation.
**Note: Some testing in this document involves testing with live AC utility
power. This power can cause serious or fatal injury if mishandled. This testing
should be done only by qualified and trained service persons.
To Next Page
Need help?
General
