What to do if Micro Matic MDD17-E does not reach temperature?
If your Micro Matic Refrigerator isn't reaching the correct temperature, make sure the thermostat isn't set to the OFF position. Also, ensure the unit isn't currently in a defrost cycle. Check that the door gasket is in good condition and properly seals the door. Verify the fan is working. Finally, avoid placing food inside until the refrigerator has reached the desired temperature.
Why is there water under my Micro Matic Refrigerator?
If you find water under your Micro Matic Refrigerator, first, check that the condenser drain pipe is correctly positioned over the pan. Secondly, verify that the refrigerator cabinet is level.
Guidance on proper placement and electrical safety precautions for installation.
Detailed steps for tapping a keg using a D-Style valve.
Details on electrical hookup, including safety warnings for installation.
Instructions for setting the temperature using the analog thermostat.
Description of buttons and symbols on the digital temperature controller.
Guide to adjusting the temperature set point on digital controllers.
Procedure for cleaning condenser coils to ensure efficient operation and prevent damage.
Checks to perform when the unit's refrigeration system is not operating.
Troubleshooting steps for when the refrigerator fails to reach the set temperature.
General| Brand | Micro Matic |
|---|---|
| Model | MDD17-E |
| Category | Refrigerator |
| Voltage | 115 V |
| Door Material | Stainless Steel |
To Next Page
