Micro Matic Pro-Line E Series - User Manual

VERSION 2.0
SAFETY
FIRST!
READ INSTRUCTIONS
COMPLETELY
Before getting started
please read this user
manual and at all times
follow the important
safety instructions.
PRO-LINE
E-SERIES
USER MANUAL & SET UP GUIDE

Summary

General Information

Terms Used

Defines hazard terms like DANGER, WARNING, ATTENTION, NOTICE.

Limitation of Liability

Manufacturer's disclaimer for damages due to incorrect operation, use, maintenance, or modifications.

Intellectual Property and Copyright Protection

States copyright and contact information for Micro Matic USA, Inc.

Customer Service

Provides contact details for technical support and service requests.

Receiving and Inspecting

Specifications & Keg Footprints

Direct Draw Models

Lists specifications for direct draw models including dimensions, HP, AMP, BTU.

Back Bar Models

Lists specifications for back bar models including dimensions, HP, AMP, BTU.

Keg Footprints

Visual representation of keg sizes and how they fit in different unit configurations.

Installation

Uncrating

Instructions for removing packaging and securing brackets. Mentions waiting period if laid down.

Sealing

Method for sealing the unit to the floor when required by sanitation codes.

Location

Guidance on choosing a suitable location for the unit, emphasizing floor strength and air circulation.

Tapping Instructions

Step-by-step guide on how to tap a keg using a D-Style valve.

Data Plate

Explanation of the data plate's location and importance for identifying unit features.

Electrical Connections

Instructions for connecting the unit to the proper power source, emphasizing grounding and voltage.

Operations

Mechanical (Analog) Temperature Control

How to set and use the analog thermostat for temperature control.

Digital Controller Buttons and Operation

Explains the symbols and functions of the digital controller buttons and display.

Electronic (Digital) Temperature Control

Detailed steps for viewing and changing the set point on the digital controller.

Defrost

Information on automatic and manual defrost cycles for electronic controller models.

Maintenance

Stainless Steel Care and Cleaning

Proper methods and recommended cleaners for maintaining stainless steel surfaces.

Cleaning the Condensor Coils

Instructions on how to clean condenser coils to ensure efficient operation and avoid warranty issues.

Drain Maintenance

Guidance on checking and maintaining drain tubes to prevent water accumulation and overflow.

Install Draft Towers and Air Supply Hose

Step-by-step guide for installing draft towers and cold air supply hoses.

Glass Rinser Water Inlet Installation

Instructions for connecting the glass rinser to the water supply, including required components.

Troubleshooting

Wiring Diagrams

MDD23-E Wiring Diagram

Wiring diagram specific to the MDD23-E model.

MDD;BB36-94-E Wiring Diagram

Wiring diagram for MDD/BB36-94-E models.

Warranty Information

One Year Parts & Labor Warranty

Details the standard one-year warranty coverage and commencement date.

Compressor Part Warranty

Specifies the extended four-year warranty for the compressor part.

Parts Warranty Coverage

Covers the 90-day warranty for new machine parts and claim procedures.

Exclusions and Conditions to Warranty Coverage

Lists exclusions, conditions like installation, no alteration, and maintenance requirements.

Micro Matic Pro-Line E Series Specifications

General

Brand	Micro Matic
Model	Pro-Line E Series
Category	Refrigerator
Language	English