EasyManua.ls Logo

Micro Rain MR 25 - Introduction

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
Thank you for purchasing a Micro Rain MR25 traveling sprinkler system. Please read this
manual carefully before operation in order to become familiar with all components and their
function. Safety is the main priority and failure to follow these instructions may cause serious
injury. Micro Rain is not responsible for machine failure or personal injury if these procedures
and operation instructions are not followed.
Do not operate your Micro Rain traveler without a serious overview of this manual
Keep children and unauthorized people away from traveler
Never allow children access to use the traveler
Use caution when disconnecting couplings
When the traveler shut-off valve activates, the supply hose remains pressurized at the end of the run.
First, relieve the pressure with the relief valve, then disconnect the supply hose.
Use caution with the sprinkler heads
Pressurized water from the sprinkler head could cause serious damage to people or objects.
Use caution during transport
Travelers are not made for public transit. Do not exceed 7mph on flat roads, or 2 mph on steep inclines.
Never service the traveler when it is in operation
Before servicing, stop the traveler and disconnect the supply line. All safety guards and shields must be in
place while operating the traveler.
Beware of power lines
Irrigation water should never contact power lines or any other power source. Never let any part of the
traveler or any irrigation pipe get in contact with power source.
Caution