Micro Rain MR 25 - Maintenance Schedule; Performance Chart

Maintenance Schedule
Inlet seals:
Drum gear:
Turbine Seals:
Grease inlet seals every 100 hours.
Grease drum gear every 100 hours.
Replace turbine seals every 500 hours or once a season. Consult your dealer for information.
Performance Chart
MR25 PERFORMANCE CHART
4 mm Nozzle
80% RUN TIME(HRS)
INLET PSI GPM
MAX
WIDTH ADJ WIDTH
MAX
LENGTH 0.10 INCH 0.25 INCH
35 3.2 72 58 201 3.10 7.74
50 4 79 63 204 2.69 6.73
60 4.5 86 69 207 2.62 6.55
5 mm Nozzle
80% RUN TIME(HRS)
INLET PSI GPM
MAX
WIDTH ADJ WIDTH
MAX
LENGTH 0.10 INCH 0.25 INCH
40 5.3 79 63 204 2.03 5.08
50 5.9 86 69 207 2.00 4.99
60 7 92 74 211 1.81 4.51
6 mm Nozzle
80% RUN TIME(HRS)
INLET PSI GPM
MAX
WIDTH ADJ WIDTH
MAX
LENGTH 0.10 INCH 0.25 INCH 0.50 INCH
45 7.4 86 69 207 1.59 3.98 7.96
55 8.5 92 74 211 1.49 3.72 7.44
60 9.2 95 76 213 1.41 3.53 7.06