PRESS & RELEASE
“UNLOCK” BUTTON
TO DISARM ALARM
& UNLOCK ONLY THE
DRIVER’S DOOR
PRESS & RELEASE
THE “UNLOCK” BUTTON
WITHIN 3 SECONDS OF
DISARMING THE ALARM TO
UNLOCK THE REMAINING
DOORS
THEN
P. 6
8008_inst.7/7/04.qx
DOOR LOCK/UNLOCK PLUG:
DRIVER’S DOOR UNLOCK: This Alarm Is Equipped With A 2-Stage Unlock Process Which Allows The User to Unlock
ONLY The Driver’s Door When Disarming The Alarm. Rest Of The Doors Can Be Unlocked By Pressing The “UNLOCK”
Button A Second Time Within 3 Seconds Of Disarming The Alarm. If This Feature Is Desired, Then 2 Independent Alarm
Unlock Wires Must Be Used.
If “UNLOCK” Is Pressed One Time To Disarm The Alarm, The Pink Wire Will Provide A
(-) Unlock Pulse & The Green Wire Will Provide A (+) Unlock Pulse. If “UNLOCK” Button Is Pressed Again Within 3-
Seconds Of Disarm The Blue Wire Will Provide A (-) Unlock Pulse.
NOTE: It Is NOT Necessary To Wire The Driver’s Door Unlock Feature. If The Feature Is Not Desired Do Not Connect The
Blue 2nd Unlock Wire. Only Connect The Primary Lock & Unlock Wires. (Green & Pink)
NOTE: If Door Locks Are Activated By Locking And Unlocking The Doors (Central Locking System). Driver’s Door
Unlock Will Not Be Possible.
When Arming The Alarm:
• The Green Wire Will Provide A (-) Lock Pulse.
• The Pink Wire Will Provide A (+) Lock Pulse.
When Disarming The Alarm:
• The Pink Wire Will Provide A (-) Unlock Pulse.
• The Green Wire Will Provide A (+) Unlock Pulse.
Second Press Of “UNLOCK” Button Within 3-Seconds Of Disarm:
• The Blue Wire Will Give A (-) Unlock Pulse.
(SEE DIAGRAM)
To Next Page