Micro EXPLORER - Charging and Braking; Charging the Battery; Brakes; Operating the Foot Brake

20
Charging the battery
The following describes the charging process:
 Connect the electric scooter to the charger.
 Connect the charger to an electrical outlet. You can see that the charger and scooter
are connected correctly when the LED display on the power supply unit changes to
red (this may take a few seconds).
 When the scooter is fully charged, the LED display on the charger changes to green.
The installed batteries are rechargeable
lithium-ion batteries. Never charge batteries
that are not intended to be recharged.
WARNING
Brakes
Whenever possible, use several brakes at the same time during braking.
Change the brakes during long downhill rides to avoid overheating.
21
Damp or wet road surfaces result in a longer
braking distance. Be careful and reduce the
speed on slippery or uneven road surfaces.
WARNING
Operating the foot brake
During braking, shi the body so that the centre of gravity points towards the rear
wheel to achieve the best braking performance. Shiing your weight backwards /
downwards reduces the braking distance considerably. Operating the foot brake
activates the motor brake automatically.
EN