The electric scooter is not generally approved
for use on public roads. Please note that
each country has specic regulations and
restrictions for electric vehicles in road trac
(especially in terms of maximum speed,
performance and authorised roads). Please
inform yourself about the applicable guidelines
for your country in person and in detail.
NOTE
Setting of the riding programs
You can change between the riding programs by clicking on the on/o & mode
selection button.
24
Display interface and functions
The following illustration shows the dierent positions on the display.
The number (1–4) at the top of the screen shows the selected riding mode.
The large numbers on the le show the current speed.
The battery icon on the le displays the current state of charge of your battery.
1. ON/OFF & Mode selection button:
– ON/OFF: press seconds
– Mode (–): press shortly
2. Light button:
– Light ON/OFF: press shortly
– Cruise control: press seconds
3. Bluetooth sign
4. Mode (–)
5. Speed
6. Battery level
25
MAINTENANCE
To ensure a long operating life of your electric scooter, it is necessary to bring the
scooter for a service once a year or every 500 kilometres (whichever occurs rst) to an
authorized dealer or an authorized service centre. Provide the service centre with the
service record and make sure that the service has been entered correctly.
Battery maintenance
Please follow the care instructions to ensure a long lifetime of your battery pack:
Store batteries at a temperature between 5° and 25° Celsius.
Fully charge the battery immediately aer purchase.
Fully charge the battery every three months if the scooter is not in use.
The battery needs to be recharged within three days aer it has been completely
drained.
Damage resulting from non-compliance with
the above care instructions is not covered by
warranty claims.
Aer using the electric scooter for the rst 5
hours, check whether all screws are tightened
and, if necessary, tighten any loose screw.
NOTE
NOTE
EN
To Next Page
Loading...