6
Any use or gift taxes, duties or other related taxes are not included and
are the sole responsibility of the winner.
Entry Requirements
The dsPIC30F Design Contest Kit Project Entry Form must be completed
with the required les attached. For each dsPIC30F Design Contest Kit
purchased, contestants can submit one entry.
All entries must be received by Microchip on or before September 10,
2004 at noon Mountain Standard Time.
After purchasing a dsPIC30F Design Contest Kit, contestants can design
whatever they choose using the included dsPICDEM™ General Purpose
Development Board. If you already own a dsPICDEM General Purpose
Development Board, you do not need to purchase another board.
Customers who already own the dsPICDEM General Purpose Development
Board and wish to participate in the contest can e-mail
dspicpromotions@microchip.com to request contest materials. Such
requests must be received no later than June 11, 2004 and the
subject line of the e-mail must contain the words, “PRESENT BOARD
OWNER.” The application developed must run on the dsPICDEM General
Purpose Development Board. Contestants can attach other devices
to the dsPICDEM General Purpose Development Board. The designed
application must be functional and must be programmed using Assembly
and/or C code.
After nishing the design, contestants must complete each element of
the dsPIC30F Design Contest Project Entry Form contained in the Design
Contest Kit and submit this form, items on the Project Checklist and, if
completed, the optional design idea or feature length article.
Entry Submittal
Entries can be submitted in one of two ways:
• E-mail your project information/les to:
dspicpromotions@microchip.com.
• Mail a CD-ROM/oppy disk with your project information/les
and any printed material (Microchip is not responsible for
materials lost in the mail) to:
dsPIC30F Design Contest Manager MS-1E
Microchip Technology Inc.
2355 W. Chandler Blvd.
Chandler, AZ 85224
To Next Page
Loading...
