MPLAB
®
REAL ICE
™
In-Circuit Emulator User’s Guide
DS51616A-page 8 © 2006 Microchip Technology Inc.
1.4 MPLAB REAL ICE IN-CIRCUIT EMULATOR KIT COMPONENTS
The components of the MPLAB REAL ICE in-circuit emulator system kit are listed
below.
1. MPLAB IDE Quick Start Guide (DS51281)
2. CD-ROM with MPLAB IDE software and on-line documentation
3. Emulator pod
4. USB cable to provide communications between the emulator and a PC and to
provide power to the emulator
5. Standard driver board (MPLAB ICD 2 compatible) and cable to connect the
emulator pod to a header module or target board
6. Logic probes
7. Self-Test board
Additional hardware that may be ordered separately:
8. Processor Extension Pack: High-speed driver board, ICE header/receiver board
and cables to connect the emulator pod to a target board
9. Performance Pack: High-speed driver board, high-speed receiver board and
cables to connect the emulator pod to a target board
10. High-speed to standard converter board
11. Transition socket
To Next Page
Loading...