Glossary
© 2006 Microchip Technology Inc. DS51616A-page 63
Upload
The Upload function transfers data from a tool, such as an emulator or programmer, to
the host PC or from the target board to the emulator.
USB
Universal Serial Bus. An external peripheral interface standard for communication
between a computer and external peripherals over a cable using bi-serial transmission.
USB 1.0/1.1 supports data transfer rates of 12 Mbps. Also referred to as high-speed
USB, USB 2.0 supports data rates up to 480 Mbps.
Warning
An alert that is provided to warn you of a situation that would cause physical damage
to a device, software file or equipment.
Watch Variable
A variable that you may monitor during a debugging session in a Watch window.
Watch Window
Watch windows contain a list of watch variables that are updated at each breakpoint.
Watchdog Timer
A timer on a PICmicro microcontroller that resets the processor after a selectable
length of time. The WDT is enabled or disabled and set up using Configuration bits.
WDT
See Watchdog Timer.
To Next Page
Loading...
