EasyManua.ls Logo

Microh LED Trickster - TECHNICAL SPECIFICATIONS; MAINTENANCE AND CLEANING

Microh LED Trickster
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
9. TECHNICAL SPECIFICATIONS
MODEL: LED TRICKSTER
LED’s: 60x RED, 75x GREEN, 45x BLUE, 30x WHITE plus 72x WHITE strobes LED’S
OPERATING TEMPERATURE: -25°C to 45°C
VOLTAGE: 110VAC 60Hz 84W
FUSE: 1A
DIMENSIONS: 310(H) x310(W) x230(L) mm
NET WEIGHT: 4 kg
WARRANTY: 2 Year Limited Warranty
10. MAINTENANCE AND CLEANING
The following points have to be considered during the inspection:
1) All screws for installing the device or parts of the device must be tightly connected, and must not be corroded.
2) There must not be any deformations on the housing, colour lenses, fixations or installation spots (ceiling,
suspension, trussing).
3) Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances.
4The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage must be handled by a skilled installer or technician.
Any safety issues must be resolved.
In order to keep the fixture in good condition and extend the life, we suggest regular cleaning to the fixture.
1) Clean the inside and outside lens each week to avoid the light output from darkening due to accumulation of dust,
dirt, etc.
2) Clean the fan each week.
3) A detailed electrical check by approved technician every three months is advised. Ensure the circuit contacts are in
good condition.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or solvents.
There are no serviceable parts inside the device. Please refer to the instructions under “Installation instructions”.
Should you need any spare parts, please order genuine MICROH parts from your local dealer.

Related product manuals