microjig GRR-RIPPER GR-100 User Manual

Micro Jig, Inc. • PO Box 195607 • Winter Springs, FL 32719 • USA • MICROJIG.com
MICROJIG, GRR-RIPPER, 3D PUSHBLOCK and Green GRR-RIP are registered trademarks of Micro Jig.
A true Micro Jig innovation. © 2013 US Patent # 7,040,206
3D PUSHBLOCK
For use on table saws, bandsaws,
router tables, jointers and more.
GR-100 & GR-200
Instruction Manual v6.0
Read the Important Safety Disclaimers
in this manual prior to use. Keep manual
for future reference.
GR-200
GR-100
To explore our latest innovations visit us at MICROJIG.com

microjig GRR-RIPPER GR-100 Specifications

General

Brand	microjig
Model	GRR-RIPPER GR-100
Category	Tools
Language	English

Summary

Introduction to GRR-RIPPER

Adjustable Design Features

Details the adjustable features of the GRR-RIPPER for various project requirements.

Warranty Registration Process

Information on how to register your MicroJig product for warranty coverage.

MicroJig E-Newsletter Signup

Instructions for signing up for the MicroJig e-newsletter and receiving a whitepaper.

Safety Basics and Precautions

Critical Safety Warnings

Critical safety warnings and general precautions for operating the GRR-RIPPER system.

General Safety Practices

Essential safety practices for using the GRR-RIPPER, including personal protective equipment.

Table Saw Preparation Guidelines

Guidelines for preparing your table saw, including fence alignment and blade selection.

GRR-RIPPER Assembly Guide

Basic Model GR-100 Assembly

Step-by-step instructions for assembling the GRR-RIPPER Basic Model GR-100.

Advanced Model GR-200 Assembly

Step-by-step instructions for assembling the GRR-RIPPER Advanced Model GR-200.

Techniques for Using GRR-RIPPER

Using the 1/4" Leg

Guidance on utilizing the 1/4" Side Leg for specific cutting widths and applications.

Using the 1/2" Leg

Instructions for using the 1/2" Side Leg for wider cuts and stability.

Handling Irregularly Shaped Stock

Techniques for feeding and cutting irregularly shaped workpieces.

Resawing Techniques

Methods for resawing narrow stock efficiently and safely with the GRR-RIPPER.

Bevel Cutting Procedures

How to perform bevel cuts from 0 to 45 degrees with enhanced control.

Pattern Routing and Slotting

Using the GRR-RIPPER for pattern routing and slotting operations.