Microlab S335 - Technical Information; Features Overview; Product Specifications; Unpacking and System Contents

Unpacking:
1. .
2.Take off the box.
3.Remove the inner packing from the product.
We suggest you retain the packing for future use.
Convert the box and the contents inside
Soundbar 1pc
Woofer 1pc
1pc
Audio cable(2RCA-2RCA) 1pc
User manual 1pc
Screws( 3mm) 2pcs
Wall screw rubber holder 2pcs
You should find following items while unpacking:
Remote control
2
the apparatus is left unused for a long period of time.
20.Serving Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
21.Replacement parts When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
22.Mains fuses For continued protection against fire hazard, use fuses only of the correct type and rating. The correct fuse
specification for each voltage range is marked on the product.
23.Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the
speaker may be damaged when a peak level section is suddenly played.
24.The only means of completely disconnecting the product from the power supply is by removing the power cord from the
wall outlet or the product. Either the wall outlet or the power cord entry to the product must remain freely accessible at all
times while the apparatus is in use.
－
－
－
Unpacking the system
Technical Information
5
Specification
Amplifier specification:
AC IN 220V-240V~ 50Hz 200mA
Power output 13W+10Wx2 RMS
Speaker unit: 5"+2.5 "x2
Product size(WxDxH): soundbar 752x109x116mm
woofer 160x205x270mm
Features:
eAirbass
Audio frequency balance
FineCone
Remote control
External subwoofer
eAirBass Technology to enhance bass delivery, avoid distortion.
Bass Reflex Structure to improve Bass Response and eliminate unwanted airflow.
Professional multi frequency control system precisely adjust frequency level to ensure a clear
and stunningly realistic audio reproduction.
FineCone Drivers are designed by Peter Larson in Denmark to achieve high resolution and
perfect audio reproduction.
Full function remote control is offered
80-S335-97-0001-01 2009-01-06