Microlab Solo 15 - User Manual

SOLO15
User Manual
HIGH FIDELITY STEREO SYSTEM
Before using, please read the manual carefully
www.microlab.com
www.microlab.cn
Microlab Electronics Company Limited
Made in China
All symbols and logo belong to the respective brand holder or registered holder. All specifications and information are subject to changes without
further notice. Slight variations and differences might appear between the printed photos and actual product due to product enhancement.

Summary

Important Safety Instructions

Explanation of Graphical Symbols

Explains the meaning of caution symbols like lightning flash and exclamation mark.

Introduction

Features

Packing list

Illustrations

Product Connection and Operation

Connections

Steps for connecting the speakers to playback devices and power source.

Operation

Instructions for turning on, adjusting volume, and turning off the speakers.

Microlab Solo 15 Specifications

General

Type	2.1 Stereo System
Total Power Output	30 W
Frequency Response	40 Hz - 20 kHz
Signal-to-Noise Ratio	75 dB
Input Impedance	10 kΩ
Tweeter Driver Type	1 inch
Material	MDF
Color	Black
Power Output	30 W
Input Sensitivity	500 mV
Separation	45 dB
Woofer Driver Type	5.25 inch