Microlab SOLO4C - Troubleshooting

Specification
*Amplifier specification:
AC IN 220V-240V~ 50Hz 400mA
Power output 28Wx2 R MS
Frequency response 5 H z-70KH z
Sensitivity Input 440mV
Separation 55 dB
S/N 85 dB
*Acoustic specification:
Frequency response 60 H z-20KH z
Sensitivity 85dB
*Driver unit: 4" ( m agnetically shielded)+1"
*Audio input: (AUX) RCA jack
(PC) RCA jack
(L Speaker) screw terminal
*Audio output: screw terminal
*Product size(DxWxH): 205x165x265mm
Technical Information
5
Features:
*Designed for Multimedia PC, High Performance to Price Ratio.
*Complete wooden box with elegant wooden finish make pure sounds,avoid sound mixture.
*The system is magnetically shielded which can be put near the monitor or TV, and without
magnetic influence.
*The ultimate aim of Microlab R&D system is to inherit and carry forward the European musical
culture style. To do this, all designs must be music-oriented and sourced from music and art.
Having Microlab, you can enjoy European musical taste.
Trouble Shooting
6
Troubles Solution
Check if the system is powered on
Check the power plug well connected
Check if the audio source is working well
Check if the audio and speaker cables well
connected
Check if the volume at right level
One or more satellite no sound Check if the satellite cable well connected
No Bass Check if the Bass Volume at right level
Remote control not working Check if the battery in the remote control
If the problem still exists, please contact the distributor or ask for professional service
Power LED won't light up
No Sound
Sound is distorted
Check if the volume at lower level