1. During charging, press any output port button to turn on the
corresponding output and display.
2. When the output power is greater than the input power, it will display
the charging status and corresponding output symbol, as well as the
output power and the remaining use time.
3. When the output power is less than the input power, it will display the
charging status and corresponding output symbol, as well as the input
power and required time for full charging of the battery.
Display function during charging and discharging
2. When turning on the AC output, the symbol of lights up. When a
load is connected, the output power and remaining use time are
displayed.
3. When turning on the LED light, the symbol of lights up. The
output power and the remaining use time are displayed at the same time.
4. When turning on the DC output, the symbol of light up. The
output power and the remaining use time are displayed at the same time.
5. When turning on the PD100W output, the symbol of lights up. The
output power and the remaining use time are displayed at the same time.
6. When multiple ports are output at the same time, the total output
power and remaining discharge time are displayed.
7. When a fault occurs, please turn off the port output immediately. The
symbol of corresponding port and will flash for 10s, and it does not
affect other output.
8. When any output port is working, press the button of other output
ports to turn on the corresponding output and display.
DC
To Next Page
Loading...