7
4. Using your blood pressure monitor for the first time
4.1. Inserting the batteries
After you have unpacked your device, insert
the batteries. The battery compartment is
located on the bottom of the device.
a) Remove the battery cover.
b) Insert the batteries (4 x size AA 1.5 V),
observing the indicated polarity.
c) If a battery warning appears in the
display, the batteries are discharged and
must be replaced.
Attention!
• After the low battery indicator appears,
the device won’t function until the batter-
ies have been replaced.
•
Please use "AA" Long-Life or Alkaline
1.5 V
batteries.
• If the blood pressure monitor is not used
for long periods, remove the batteries
from the device.
4.2. Setting the date and time
1. After the new batteries are activated, the
year number flashes in the display. You
can advance the year by pressing the "M"
button. To confirm and then set the
month, press the TIME button.
2. You can now set the month using the "M"
button. To confirm and then set the day,
press the TIME button.
3. Please follow the instructions above to
set the day, hour and minutes.
Low Battery Indicator
To Next Page
Loading...
