What to do if Microlife BP3AQ1 Blood Pressure Monitor shows Error No. ER 5?
If you frequently receive Error No. ER 5 on your Microlife Blood Pressure Monitor, measure again carefully following proper cuff procedures and ensure measurement under quiet conditions. Contact your doctor if the message continues to appear.
Why does my Microlife BP3AQ1 Blood Pressure Monitor show Error No. ER 2?
Error No. ER 2 on your Microlife Blood Pressure Monitor indicates that the arm was moved during the measurement (Artefact).
Why does my Microlife Blood Pressure Monitor show Error No. ER 3?
Error No. ER 3 on your Microlife Blood Pressure Monitor means that the cuff is not correctly seated or the hose connection is not sealed.
What does Error No. ER 1 mean on Microlife Blood Pressure Monitor?
Error No. ER 1 on your Microlife Blood Pressure Monitor indicates that the systolic pressure was determined but afterwards the cuff pressure fell below 20 mmHg. This can occur, for example, if the tube becomes unplugged after the systolic blood pressure has been measured.
General| Brand | Microlife |
|---|---|
| Model | BP3AQ1 |
| Category | Blood Pressure Monitor |
| Language | English |
Details the features of the fully automatic, digital blood pressure monitor for upper arm use.
Provides essential warnings and advice regarding self-measurement and its limitations.
Explains the physiological factors and processes that determine blood pressure levels.
Defines normal blood pressure ranges and advises on actions for high or low readings.
Offers guidance on managing and preventing high or low blood pressure through lifestyle changes.
Details the components of the main measuring unit, including the display and buttons.
Describes the available upper arm cuffs, including sizes and how to obtain them.
Step-by-step guide on how to correctly insert batteries into the blood pressure monitor.
Instructions on how to connect and use an optional AC power adapter for the device.
Explains how to properly connect the cuff tube to the blood pressure monitor.
Provides essential pre-measurement guidelines for accurate blood pressure readings.
Identifies common factors that can lead to inaccurate blood pressure measurements.
Detailed instructions and illustrations for correctly fitting the blood pressure cuff on the arm.
Step-by-step guide on initiating and conducting a blood pressure measurement.
Explains how to access and view the last stored blood pressure measurement.
Provides instructions on how to safely interrupt an ongoing blood pressure measurement.
Provides solutions for common error codes (ER 1, ER 2, ER 3, ER 5) encountered during operation.
Provides guidance on proper handling, cleaning, and maintenance to ensure device longevity and accuracy.
Details the warranty period, coverage, and exclusions for the Microlife blood pressure monitor.
Lists the device standards, electromagnetic compatibility, and clinical testing compliance.
Provides detailed technical specifications including operating conditions, dimensions, and power requirements.
Offers contact information for Microlife USA, Inc. for support and inquiries.
To Next Page