What to do if my Microlife Blood Pressure Monitor shows Err 2?
If your Microlife Blood Pressure Monitor displays 'Err 2', it means the arm was moved during the measurement. Remain still and repeat the measurement.
What to do if my Microlife BP3AA1-2 Blood Pressure Monitor shows Err 1?
If your Microlife Blood Pressure Monitor displays 'Err 1', it could be due to a couple of reasons: either the systolic pressure was determined but afterwards the cuff pressure fell below 20 mmHg (which can happen if the tube becomes unplugged after measuring systolic blood pressure), or no pulse could be detected. In either case, check the tube connections and repeat the measurement.
What to do if Microlife BP3AA1-2 shows Err 5?
If your Microlife Blood Pressure Monitor displays 'Err 5', it indicates an unacceptable difference between systolic and diastolic pressures in the measured readings. Take another reading following directions carefully. Contact your doctor if you continue to get unusual readings.
General| Model | BP3AA1-2 |
|---|---|
| Type | Upper Arm Blood Pressure Monitor |
| Measurement Method | Oscillometric |
| Inflation | Automatic |
| Deflation | Automatic |
| Cuff Size | 22-32 cm |
| Display | LCD |
| Accuracy | ±3 mmHg |
| Memory | 30 measurements |
| Measurement Range | 0-299 mmHg (pressure), 40-180 beats/min (pulse) |
| Power Source | 4 x 1.5V AA batteries |
Provides crucial warnings about self-measurement, its limits, and potential interference from electronic devices.
Introduces Microlife Averaging Mode (MAM) Technology for accurate readings by averaging three measurements.
Identifies common errors that can affect blood pressure readings and provides tips for improving accuracy.
Comprehensive instructions on how to properly fit the cuff on the arm for correct measurement, including size checks.
Explains how to select between single measurement and Microlife Averaging Mode (MAM) for multiple readings.
Details the step-by-step process for performing a blood pressure measurement, including MAM mode operation.
Lists common error codes (Err 1, Err 2, Err 3, Err 5) and their possible causes and remedies.
Addresses other common malfunctions like empty display, pump issues, and inconsistent readings, offering solutions.
To Next Page