1
Table of contents
1. Introduction
1.1 Features of your blood pressure monitor
1.2 Important information about self measurement
2. Important information on the subject of blood pressure and its measurement
2.1. How does high/low blood pressure arise?
2.2. Which values are normal?
2.3. What can be done, if regular high/low values are obtained?
2.4. Microlife Averaging Mode Technology
3. Components of your blood pressure monitor
4. Operation of your blood pressure monitor
4.1. Inserting the batteries
4.2. Using an AC power adapter
4.3. Cuff connection
4.4. Setting the time and date
4.5. Reading the set date
5. The measurement procedure
5.1. Before measuring
5.2. Common sources of error
5.3. Fitting the cuff
5.4. Measurement mode selection (single or average mode)
5.5. Setting memory for user 1 or user 2
5.6. Measuring procedure
5.7. Discontinuing a measurement
5.8. Memory – recall of the measurements
5.9. Clearing the memory
6. Error messages/Troubleshooting
7. Care and maintenance
8. Warranty
9. Certifications
10. Technical specifications
11. How to contact us
To Next Page
Loading...
Need help?
General
