Need help?Do you have a question about the Microlife BP3NA1-1X and is the answer not in the manual?
General| Category | Blood Pressure Monitor |
|---|---|
| Model | BP3NA1-1X |
| Brand | Microlife |
| Measurement Method | Oscillometric |
| Display | LCD |
| Measurement Range (Blood Pressure) | 0 - 280 mmHg |
| Accuracy (Blood Pressure) | ± 3 mmHg |
| Accuracy (Pulse) | ± 5% |
| Inflation | Automatic |
| Deflation | Automatic |
| Memory | 30 readings |
| Measurement Range (Pulse) | 40-200 beats per minute |
| Cuff Size | 22-32 cm |
| Power Source | 4 x AA batteries |
| Operating Temperature | 10 - 40 °C |
| Operating Humidity | 15% to 90% RH |
| Storage Humidity | 10 - 95% |
| Weight (without batteries) | 300 g |
| Storage Temperature | -20°C to 60°C |
Stresses self-measurement is for control, not diagnosis, and advises doctor consultation for unusual values or pacemaker use.
Provides guidelines for high, low, and normal blood pressure values based on JNC7 standards, advising doctor consultation.
Advises on preparation steps before taking a measurement, like avoiding food, smoking, exertion, and proper positioning.
Lists common mistakes that can lead to inaccurate readings, such as arm position, cuff fit, and repeated measurements.
Details the correct method for wrapping and securing the cuff on the arm for accurate measurements.
Describes the step-by-step process of initiating and performing a blood pressure measurement.
Addresses malfunctions like blank display, pump issues, inconsistent values, and cuff pressure problems.
To Next Page