19
8. Care and Maintenance
a) Do not expose the device to either extreme
temperatures, humidity, dust or direct sunlight.
b) The cuff contains a sensitive air-tight bubble.
Handle this cuff carefully and avoid all types of
stress through twisting or buckling.
c) Clean the device with a soft, dry cloth. Do not
use gas, thinners or similar solvents. Spots on
the cuff can be removed carefully with a damp
cloth and soapsuds. The cuff with bladder
must not be washed in a dishwasher,
clothes washer, or submerged in water.
d) Handle the tube carefully. Do not pull on it. Do
not allow the tubing to kink and keep it away
from sharp edges.
e) Do not drop the monitor or treat it roughly in
any way. Avoid strong vibrations.
f) Never open the monitor! This invalidates the
manufacturer’s warrantee.
g) Batteries and electronic instruments must be
disposed of in accordance with the locally appli-
cable regulations, not with domestic waste.
8.1. Accuracy test
Sensitive measuring devices must be checked for accuracy from time to time.
We recommend a periodical inspection of your unit by an authorized dealer every 2 years.
Your factory authorized dealer would be pleased to provide more information regarding
accuracy checks. Call 1-800-568-4147 for more information.
To Next Page
Loading...
Need help?
General
