How to fix Err 1 on Microlife Blood Pressure Monitor?
If your Microlife Blood Pressure Monitor displays 'Err 1', it indicates that no pulse has been detected. Ensure the cuff is correctly placed and try again.
What to do if Microlife BP3MA1-3 shows Err 3?
If your Microlife Blood Pressure Monitor displays 'Err 3', it indicates an issue during measurement. This may be because the arm was moved, the cuff took too long to inflate, or the cuff is not positioned correctly. Ensure you remain still during measurement and that the cuff is properly positioned.
Why does my Microlife Blood Pressure Monitor say Err 2?
If your Microlife Blood Pressure Monitor displays 'Err 2', it means the cuff may be positioned incorrectly. Please readjust the cuff according to the instructions.
General| Model | BP3MA1-3 |
|---|---|
| Type | Upper Arm Blood Pressure Monitor |
| Measurement Method | Oscillometric |
| Display | LCD |
| Accuracy (Blood Pressure) | ±3 mmHg |
| Accuracy (Pulse) | ±5% |
| Inflation | Automatic |
| Deflation | Automatic |
| Memory | 30 readings |
| Measurement Range (Pulse) | 40 - 199 bpm |
| Cuff Size | 22-32 cm |
| Pulse Rate Range | 40 - 199 bpm |
| Power Source | 4 x 1.5V alkaline batteries size AA |
To Next Page