14
☞ Further information
Repeating measurements without resting inbetween results in inaccurate read-
ings. Wait several minutes in a relaxed position, sitting or lying, before you
repeat a measurement.
6. Error messages/Trouble shooting
If an error occurs during a measurement, the
measurement is discontinued and a corresponding error
code is displayed (Example: Error No. 2).
Error No. Possible cause(s)
Err 1 No pulse has been detected. Cuff may be positioned incorrectly.
Err 2 The arm was moved during the measurement.
Err 3
Inflation of the cuff took too long. The cuff is not positioned correctly.
Dec.(5) Time
(8:15pm)
(8:16am)
Systolic
Diastolic Pulse
MR 02
( MR 01: Values of the last measurement) ( MR 02- MR 99: Values of the
(Alternating display)
measurements before MR 01)
To Next Page
Loading...
