Microlife FR1MF1 - 10. Error Messages; 11. Cleaning and Disinfecting; 12. Battery Replacement

10
FR1MF1
EN
10. Error Messages
•
Measured temperature too high
AS
:
Displays
«
H
»
when measured
temperature is higher than 42.2°C (108.0 °F) in body mode or
100 °C (212 °F) in object mode
• Measured temperature too low
BT
:
Displays «
L
» when
measured temperature is lower than 34.0 °C (93.2 °F) in body
mode or 0 °C (32 °F) in object mode
•
Ambient temperature too high
BK
:
Displays
«
H
»
when
ambient temperature is higher than 40.0 °C (104.0 °F).
•
Ambient temperature too low
BL
:
Displays «
L
» when
ambient temperature is lower than 16.0 °C (60.8 °F) in body
mode or lower than 5 °C (41.0 °F) in object mode.
• Error function display
BM
:
The system has a malfunction.
• Blank display
BN
:
Check if the batteries have been installed
correctly. Also check polarity (<+> and <->) of the batteries.
• Flat battery indication
BO
:
If this icon « »is the only
symbol shown on the display, the batteries should be replaced
immediately.
11. Cleaning and Disinfecting
Use an alcohol swab or cotton tissue moistened with alcohol
(70% Isopropyl) to clean the thermometer casing and the
measuring sensor. Ensure that no liquid enters the interior of the
thermometer. Never use abrasive cleaning agents, thinners or
benzene for cleaning and never immerse the instrument in water
or other cleaning liquids. Take care not to scratch the surface of
the sensor lens and the display.
12. Battery Replacement
This instrument is supplied with 2 new, long-life 1.5V, size AAA
batteries. Batteries need replacing when this icon « »
BO
is the
only symbol shown on the display.
Replace the batteries
BR
– ensure correct polarity as shown by
the symbols in the compartment.