EasyManuals Logo

Microlife IR1DB1 User Manual

Microlife IR1DB1
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
NOTE:
In order to avoid spreading germs, please use a new probe cover for each measurement.
Check to ensure probe cover is fitted on firmly before use (
please see the diagrams below).
If the probe cover is broken, discard and apply a new one immediately.
7. Directions for Use
Important: Prior to every measurement, fit a new undamaged Probe Cover on the measuring
probe. Failure to do so may result in incorrect temperature measurement.
(X) Incorrect ( ) Correct
1. Press the ON/OFF button. The display is activated to show all
symbols for 2 seconds.
2. The last measurement reading will be shown on the display
automatically for 3 seconds with the “M“ symbol visible.
3. A beep sound is heard. The °C or °F symbol will flash. The
thermometer is ready to measure.
4. Straighten the ear canal by pulling the outer ear
up and back to give a clear view of the eardrum.
For children under 1 year:
- Pull the ear straight back
Children ages 1 year to adult:
- Pull the ear up and back.
(Caution: Many pediatricians suggest use of ear
thermometers for children older than 6 months.)
5. While pulling the outer the ear, insert the probe snugly into
the ear canal and press the "START” button. Release it, when
you hear a beep sound. A beep indicates measurement is complete.
6. Remove the thermometer from the ear. The display shows the
measured temperature.
1 year-adult Newborn-1 year
5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Microlife IR1DB1 and is the answer not in the manual?

Microlife IR1DB1 Specifications

General IconGeneral
BrandMicrolife
ModelIR1DB1
CategoryThermometer
LanguageEnglish

Related product manuals