1Microlife NC 150
EN
This Microlife thermometer is a high quality product incorporating
the latest technology and tested in accordance with international
standards. With its unique technology, this device can provide a
stable, heat-interference-free reading with each measurement.
The device performs a self-test every time it is switched on to
always guarantee the specified accuracy of any measurement.
This Microlife thermometer is intended for the periodic measure-
ment and monitoring of human body temperature.
This thermometer has been clinically tested and proven to be
safe and accurate when used in accordance to the operating
instruction manual.
Please read through these instructions carefully in order for you to
understand all functions and safety information.
Table of contents
1. The Advantages of this Thermometer
2. Important Safety Instructions
3. How this Thermometer measures Temperature
4. Control Displays and Symbols
5. Setting Date, Time and Beeper Functions
6. Changing between Body and Object Mode
7. Directions for Use
8. Changing between Celsius and Fahrenheit
9. How to recall 30 readings in Memory Mode
10. Error Messages
11. Cleaning and disinfecting
12. Battery Replacement
13. Guarantee
14. Technical Specifications
15. www.microlife.com
1. The Advantages of this Thermometer
Measures in a matter of seconds
The innovative infrared technology allows the measurement
without even touching the object. This guarantees safe and sani-
tary measurements within seconds.
Multiple uses (wide range of measurement)
This thermometer offers a wide range of measurement from 0.1 -
99.9 °C / 32.2 - 211.8 °F, meaning the unit can be used to measure
Microlife NC 150
EN
1 Measuring sensor
2 Tracking light
3 Display
4 START button
5 ON/OFF button
6 Mode switch
7 Battery compartment cover
8 M-button (memory)
9 All segments displayed
AT Memory
AK Ready for measuring
AL Measurement complete
AM Body mode
AN Object mode
AO Low battery indicator
AP Changing between Celsius and Fahrenheit
AQ Recall mode
AR Recall the last 30 readings
AS Measured temperature too high
BT Measured temperature too low
BK Ambient temperature too high
BL Ambient temperature too low
BM Error function display
BN Blank display
BO Flat battery
BP Date/Time
BQ Beeper function setting
BR Replacing the battery
Read the important information in these
instructions for use before using this
device. Follow the instructions for use for
your safety and keep it for future reference.
Type BF applied part
Keep dry
To Next Page
Loading...
