4.3. Self-measurement mode
To measure your own body temperature:
1. Press the START/IO button. When activated,
the display will briefly display all symbols
2. When the device is ready, «°C»/«°F» will flash.
3. Aim the thermometer at the center of your
forehead. A green light will appear when the
thermometer is within an accurate range,
approx. 2 in (5 cm).
4.
The thermometer will beep when your measure-
ment
is complete, and your temperature will be
displayed.
4.4. Measuring in object mode
To measure the temperature of an object (without
auto measurement):
1. Press the START/IO button. When activated,
the display will briefly display all symbols
2. Press the MODE button to switch to object mode.
3. When the device is ready, «°C»/«°F» will flash,
a blinking blue tracking light will appear, and
the thermometer will beep.
4.
Aim the thermometer at the object you want to
measure with a distance of no more than 2” (5
cm). Press the START/IO button. The blue light
will stop blinking and remain steady. A long
beep will verify the completion of measurement.
5. Read the recorded temperature from the LCD display.
16
body
measuring
mode
object
measuring
mode
To Next Page
Loading...
