Microlife THERMO+ - Initial Setup and Configuration; Powering and App Download; User Profile and Alert Settings

5
Before Using the Microlife Thermo+ for the First Time
Powering the Microlife Thermo+ Infrared Thermometer
The thermometer is powered by your iOS device. To use the thermometer,
ensure your iOS device has enough battery power.
Downloading the Microlife Thermo+ App from the App
Store
Go to the App Store and search for «Microlife Thermo+». Once this app has
been downloaded, the icon
will appear on your iOS device.
☞ To download the app, you need an Apple ID with an email address and
password, as well as an active Internet connection. While the Microlife Thermo+
app is free to download, you may be subject to charges from your Internet
provider for using the Internet to do so.
Creating a User Prole (optional)
If more than one person will use the monitor, create a user prole to ensure that
each user’s data is stored separately. Open
, and go to «User» to create a
prole.
Setting the Values for an Alert (optional)
If measurement values for an alert have been recommended by a doctor, set the
values for the alert.
Open
, and go to «Settings» to set and save the upper and lower temperature
limits.
After completing these steps, you are ready to take a temperature
measurement.
Note: Conrm that the time and date on your iOS device are correct.