Microlife WatchBP Home - Confirming Measurement Deletion

EN
27
Software commands
Transfer «DIAG.» mode data Click «Download»
Corresponding value You can remove the check mark and the corresponding value
will not be used to calculate the average.
Store data Click «Save», the le name is formed automatically from the
patient’s identity number and the sufx «Dmode.xls».
View the data Click «Patient Files»
Store the «USUAL» mode data Click «Download Usual Mode Data», the le name is formed
automatically from the patient’s identity number and the sufx
«Umode.xls».
Print the data sheet Click «Print»
Delete the memories Click «Clear Memory»
Close the program Click «Exit»
*
Please store the data before using «Clear Memory» or «Exit».
Refer to the software user manual for detailed information and instructions.