MICROLIT E-BURETTE Product Guide

MICROLIT E-BURETTE

22 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

E-Burette

PRODUCT GUIDE

Experience

the Power of

Precision in

your daily

laboratory

routine.

Table of Contents

Other manuals for MICROLIT E-BURETTE

Operation Manual22 pages

Questions and Answers:

K
Kenneth BrownAug 12, 2025
Why are there air bubbles in my MICROLIT Laboratory Equipment?
- Y
  yjohnsonAug 13, 2025
  If you notice air bubbles in your MICROLIT Laboratory Equipment, it could be due to several reasons. The instrument might have been filled too quickly, so try filling it slowly. Ensure you completely purge the instrument. Check if the filling tube is loose or damaged; firmly fasten it or replace it if necessary, cutting about 1 cm from the top. Verify that the filling tube dips into the liquid and adjust the length if needed. Also, confirm the recirculation tube is correctly mounted, with the opening facing outward toward the bottle wall.
A
Anthony FieldsAug 16, 2025
What to do if the volume delivered by my MICROLIT E-BURETTE Laboratory Equipment is smaller than indicated?
- S
  Shawn RoseAug 16, 2025
  If the volume delivered by your MICROLIT Laboratory Equipment is less than indicated, the instrument might not be completely primed. Try priming the instrument again. Another possibility is that the filling valve is blocked or damaged. Clean the filling valve, and replace it if necessary.
J
Jeanne JonesAug 20, 2025
What to do if filling is not possible with MICROLIT E-BURETTE?
- J
  Joseph GilbertAug 20, 2025
  If filling is not possible with your MICROLIT Laboratory Equipment, the filling valve might be stuck. Try cleaning the filling valve. If the valve ball is stuck, use a 200ul plastic tip to loosen it.

MICROLIT E-BURETTE Specifications

General

Type	Electronic Burette
Power Supply	Rechargeable Battery
Material (Burette Body)	Borosilicate Glass
Material (Piston)	PTFE
Stopcock	PTFE
Chemical Compatibility	Compatible with most laboratory chemicals
Valve Type	Solenoid Valve
Capacity	50 mL
Display	LCD
Calibration	User Calibration
Accuracy	±0.2% for 10 ml, ±0.2% for 25 ml, ±0.2% for 50 ml
Resolution	0.01 mL