MIXING, FILLINGAND CALIBRATION
Mixing and filling is generally the most hazardous process in the spraying operation.
follow the label instructions. use a filter (fitted in the )
and use a funnel if filling a container with a small neck. mix enough spray for the
area to be treated thereby avoiding the need for disposal of unused spray mix.
wash off any skin
contamination.
With the HERBI-4 herbicides are usually applied in around 20 litres total spray
volume per hectare, except for glyphosate which can be applied at volumes as low as
10 litres per hectare. These are lower volumes than recommended for high volume
application with knapsack sprayers.
Always Always
Only
Always
ST backpacks
Always Always
Always
wear gloves when handling use the correct equipment when
agrochemicals and equipment. mixing and measuring.
clean all equipment after use.
4
To Next Page
Loading...
