Micronta 22-185A - DC;AC Current Measurements

Making
Measurements
DC/AC
Current
Measurements
|
To measure current, you must break the circuit and
connect the leads to two circuit connection points. Never
connect the leads across a voltage source; doing so!
ill blow the fuse or damage the circuit under test. The ‘
1
WI
g
Sy) maximum input limit for DC current/AC current |
measurement is 10A (with red lead plugged to 10A jack).
N 1. Setthe function switch to DCMA or ACMA.
N DC mA
ACmA
2 |U
2. Set the range switch to the desired position.
24