Micronta 22-185A - Fuse Replacement; Replacing the Fuse

FUSE REPLACEMENT
1 OFF ON CONTINUITY
34
WARNING: TO AVOID ELECTRIC SHOCK,
DISCONNECT THE TEST PROBES BEFORE REMOVING.,
BATTERIES OR FUSE. REPLACE ONLY WITH SAME €
TYPE OF BATTERIES OR FUSE. THIS INSTRUMENT
CONTAINS NO USER SERVICEABLE PARTS. SERVICE
SHOULD BE PERFORMED ONLY BY QUALIFIED
PERSONNEL.
CAUTION: FOR CONTINUED PROTECTION AGAINST
FIRE, REPLACE ONLY WITH 0.5A, 250V FUSES (Cat. No.
270-1241).
1. Be sure POWER is OFF and test leads are
disconnected.
2. Open the battery/fuse compartment cover.
3. Pulltheredribbon in the fuse compartment; the fuse
will pop out.