Micronta 22-185A - A Word About Safety; General Safety Rules

A WORD
ABOUT SAFETY
Every precaution has been taken in the design of your
meter to ensure that it is as safe as we can make it. S
However, safe operation depends on you, the operator™
We recommend that you follow these simple safety
rules:
2 1. Never apply voltages to the meter that exceed the
N limits given in the specifications. Never apply more than
oy ; 1000V DC or 750V RMS AC between input jacks and/or
ope ground.
2. Use extreme caution when working with voltages
above 100V. Always disconnect power from the circuit
being measured before connecting test leads to high-
voltage points.
ABOVE 100V